Welcome to Shenzhen Teng Huatai Electronics Co., Ltd. official website

your location: Home ->  News ->  How Rectifier Bridge Works

How Rectifier Bridge Works

    Regarding the rectifier bridge reactor, how much do you know about it? Next, the Shenzhen bridge reactor manufacturer Xiaobian gives you a detailed introduction...
    Rectifier bridge rectifier products are bridged by four rectifier silicon chips, and are made of external insulation material. High-power rectifier bridges are encapsulated with zinc metal shells outside the insulation layer to enhance heat dissipation. There are many varieties of rectifier bridges: flat, round, square, bench-shaped (separate line and patch) and so on. There are GPP and O/J structures. The maximum rectified current is from 0.5A to 100A and the highest reverse peak voltage is from 50V to 1600V.
    A half-bridge connects half of two diode bridge rectifiers together. A half-bridge can form a bridge rectifier circuit. A half-bridge can also form a full-wave rectifier circuit with a center-tapped transformer.
    Choose rectifier bridge to consider the rectifier circuit and working voltage. Domestic commonly used are "Guangzhou Guoxin Electronics" G series rectifier bridge, imported brands have ST, IR, Taiwan's SEP, GD and so on. Rectifier bridges are generally used in full-wave rectifier circuits, which are divided into full-bridge and half-bridge.
    The full bridge is composed of four rectifier diodes connected in the form of a bridge full-wave rectifier circuit and packaged as one body. The figure is its appearance.
    The above is Shenzhen LED driver IC manufacturers, Shenzhen diode manufacturers Xiaobian give you the finishing information.